Skip to content

laboneq_applications.contrib.experiments.two_qubit.jazz

This module defines a JAZZ experiment on a pair of qubits.

Each pair, written here as q0 and q1, is coupled through a tunable coupler (TC).

In this experiment, we sweep the duration of the fast flux pulses applied to the second qubit of the pair and to the TC. The amplitude of one of those two flux pulses is swept as well: the pulse that drives the gate, which is the qubit pulse if the edge defines a control_pulse and the TC pulse if it does not.

The JAZZ experiment has the following pulse sequence:

q0 -[pi]--------------=[pi]---------------[measure][reset]---
q1 -[pi][modulated ffp][pi][modulated ffp][measure][reset]---
tc ----[     ffp     ]-----[     ffp     ]----------

create_experiment(qpu, qubit_pairs, durations, amplitudes, detunings=None, options=None)

Creates JAZZ experiment workflow.

Parameters:

Name Type Description Default
qpu QPU

The qpu consisting of the original quibts, couplers, and quantum operations.

required
qubit_pairs list[list[str]]

Pairs of qubits to run the experiment on.

required
durations QubitSweepPoints

The durations of the fast flux pulses on the couplers or control qubit. Must be a list of numbers or an array.

required
amplitudes QubitSweepPoints

The amplitues of the fast flux pulses on the coupler or control qubit. Must be a list of numbers or an array.

required
detunings float | Sequence[float] | None

The detuning in Hz to generate oscillating qubit occupations.

None
options TuneupExperimentOptions | None

The options for building the experiment. See TuneupExperimentOptions for accepted options.

None

Returns:

Name Type Description
experiment Experiment

The generated LabOne Q experiment instance to be compiled and executed.

experiment_workflow(session, qpu, qubit_pairs, durations, amplitudes, detunings=None, temporary_parameters=None, options=None)

The JAZZ Workflow.

The workflow consists of the following steps:

Parameters:

Name Type Description Default
session Session

The connected session to use for running the experiment.

required
qpu QPU

The qpu consisting of the original qubits, couplers and quantum operations.

required
qubit_pairs ArrayLike[ArrayLike[QuantumElement, QuantumElement]]

Pairs of qubit to run the experiment on.

required
durations QubitSweepPoints

The durations of the fast flux pulses on the couplers or control qubit. Must be a list of numbers or an array.

required
amplitudes QubitSweepPoints

The amplitues of the fast flux pulses on the coupler or control qubit. Must be a list of numbers or an array.

required
detunings float | Sequence[float] | None

The detuning in Hz to generate oscillating qubit occupations. detunings is a list of float values for each qubits following the order in qubits.

None
temporary_parameters dict[str, dict | TunableTransmonQubitParameters] | None

The temporary parameters to update the qubits and couplers with.

None
options TuneUpWorkflowOptions | None

The options for building the workflow. In addition to options from WorkflowOptions

None

Returns:

Name Type Description
result None

The result of the workflow.