IQ Blobs¶
Prerequisites¶
This guide assumes you have a configured DeviceSetup as well as Qubit objects with assigned parameters. Please see our tutorials if you need to create your setup and qubits for the first time.
You can run this notebook on real hardware in the lab. However, if you don't have the hardware at your disposal, you can also run the notebook "as is" using an emulated session (see below).
If you are just getting started with the LabOne Q Applications Library, please don't hesitate to reach out to us at info@zhinst.com.
Background¶
In this how-to guide, you'll investigate the complex response of qubit readout for different qubit states and display the results in the IQ-plane. The experiment itself is very simple: we prepare the qubit in the one of its basis states - g, e, or f - and perform single-shot measurements.
Measurements on superconducting qubits such as Transmons are often based on dispersive readout. Here, the qubit (Qubit) itself is not directly probed, instead a resonator (Res), which is coupled capacitively to the qubit, is probed with a measure pulse close to its resonance frequency (see figure below). The amplitude and phase of the returning measure pulse (here transmitted) contain information about the qubit state.
Here we use the effect that the readout resonator is sensitive to the qubit state as depicted by the transmitted amplitude and phase response of the readout resonator below.
Note: In the dispersive limit, i.e., when the qubit frequency is far detuned from the resonance frequency of the resonator, there is no direct exchange of energy between the two systems. Hence, we minimize back action on the qubit (quantum non-demolition (QND) measurement).
Measurements in the IQ-plane¶
In the iq_blobs experiment we prepare the qubit in the one of its basis states - e.g. g or e - and perform single-shot measurements.
For each single-shot measurement we demodulate and integrate the resonator response to obtain the in-phase ( $I$ ) and quadrature ( $Q$ ) component (link to qubit_readout explanation). Amplitude $A$ and phase $\theta$ of a single-shot measurement are directly related to in-phase and quadrature components via
$$ I = \text{Re}[A\cdot \exp(i\cdot \theta)] $$
$$ Q = \text{Im}[A\cdot \exp(i\cdot \theta)] $$
By repeating the single-shot measurements many times, we obtain the state distribution for each state in the complex plane. Below a schematic complex plane representation of states $g$ and $e$, composed of the in-phase ( $I$ ) and quadrature ( $Q$ ) components.
A good starting point for the readout frequency is given by the readout resonator frequency with the qubit in the ground state $g$.
Imports¶
You'll start by importing laboneq.simple.
from laboneq.simple import *
Define your experimental setup¶
Let's define our experimental setup. We will need:
a set of TunableTransmonOperations
a QPU
Here, we will be brief. We will mainly provide the code to obtain these objects. To learn more, check out these other tutorials:
We will use 3 TunableTransmonQubits in this guide. Change this number to the one describing your setup.
number_of_qubits = 3
DeviceSetup¶
This guide requires a setup that can drive and readout tunable transmon qubits. Your setup could contain an SHFQC+ instrument, or an SHFSG and an SHFQA instruments. Here, we will use an SHFQC+ with 6 signal generation channels and a PQSC.
If you have used LabOne Q before and already have a DeviceSetup for your setup, you can reuse that.
If you do not have a DeviceSetup, you can create one using the code below. Just change the device numbers to the ones in your rack and adjust any other input parameters as needed.
# Setting get_zsync=True below, automatically detects the zsync ports of the PQCS that
# are used by the other instruments in this descriptor.
# Here, we are not connected to instruments, so we set this flag to False.
from laboneq.contrib.example_helpers.generate_descriptor import generate_descriptor
descriptor = generate_descriptor(
pqsc=["DEV10001"],
shfqc_6=["DEV12001"],
number_data_qubits=number_of_qubits,
multiplex=True,
number_multiplex=number_of_qubits,
include_cr_lines=False,
get_zsync=False, # set to True when at a real setup
ip_address="localhost",
)
setup = DeviceSetup.from_descriptor(descriptor, "localhost")
Qubits¶
We will generate 3 TunableTransmonQubits from the logical signal groups in our DeviceSetup. The names of the logical signal groups, q0, q1, q2, will be the UIDs of the qubits. Moreover, the qubits will have the same logical signal lines as the ones of the logical signal groups in the DeviceSetup.
from laboneq_applications.qpu_types.tunable_transmon import (
TunableTransmonQubit,
)
qubits = TunableTransmonQubit.from_device_setup(setup)
for q in qubits:
print("-------------")
print("Qubit UID:", q.uid)
print("Qubit logical signals:")
for sig, lsg in q.signals.items():
print(f" {sig:<10} ('{lsg:>10}')")
Configure the qubit parameters to reflect the properties of the qubits on your QPU using the following code:
for q in qubits:
q.parameters.ge_drive_pulse["sigma"] = 0.25
q.parameters.readout_amplitude = 0.5
q.parameters.reset_delay_length = 1e-6
q.parameters.readout_range_out = -25
q.parameters.readout_lo_frequency = 7.4e9
q.parameters.ge_drive_length = 100e-9
q.parameters.ef_drive_length = 100e-9
q.parameters.ef_drive_amplitude_pi = 0.5 * q.parameters.ge_drive_amplitude_pi
q.parameters.ef_drive_amplitude_pi2 = 0.5 * q.parameters.ge_drive_amplitude_pi2
qubits[0].parameters.drive_lo_frequency = 6.4e9
qubits[0].parameters.resonance_frequency_ge = 6.3e9
qubits[0].parameters.resonance_frequency_ef = 6.0e9
qubits[0].parameters.readout_resonator_frequency = 7.0e9
qubits[1].parameters.drive_lo_frequency = 6.4e9
qubits[1].parameters.resonance_frequency_ge = 6.5e9
qubits[1].parameters.resonance_frequency_ef = 6.3e9
qubits[1].parameters.readout_resonator_frequency = 7.3e9
qubits[2].parameters.drive_lo_frequency = 6.0e9
qubits[2].parameters.resonance_frequency_ge = 5.8e9
qubits[2].parameters.resonance_frequency_ef = 5.6e9
qubits[2].parameters.readout_resonator_frequency = 7.2e9
Quantum Operations¶
Create the set of TunableTransmonOperations:
from laboneq_applications.qpu_types.tunable_transmon import TunableTransmonOperations
qops = TunableTransmonOperations()
QPU¶
Create the QPU object from the qubits and the quantum operations
from laboneq.dsl.quantum import QPU
qpu = QPU(qubits, quantum_operations=qops)
Alternatively, load from a file¶
If you you already have a DeviceSetup and a QPU stored in .json files, you can simply load them back using the code below:
from laboneq import serializers
setup = serializers.load(full_path_to_device_setup_file)
qpu = serializers.load(full_path_to_qpu_file)
qubits = qpu.qubits
qops = qpu.quantum_operations
Connect to Session¶
session = Session(setup)
session.connect(do_emulation=True) # do_emulation=False when at a real setup
Create a FolderStore for Saving Data¶
The experiment Workflows can automatically save the inputs and outputs of all their tasks to the folder path we specify when instantiating the FolderStore. Here, we choose the current working directory.
# import FolderStore from the `workflow` namespace of LabOne Q, which was imported
# from `laboneq.simple`
from pathlib import Path
folder_store = workflow.logbook.FolderStore(Path.cwd())
We disable saving in this guide. To enable it, simply run folder_store.activate().
folder_store.deactivate()
Optional: Configure the LoggingStore¶
You can also activate/deactivate the LoggingStore, which is used for displaying the Workflow logging information in the notebook; see again the tutorial on Recording Experiment Workflow Results for details.
Displaying the Workflow logging information is activated by default, but here we deactivate it to shorten the outputs, which are not very meaningful in emulation mode.
We recommend that you do not deactivate the Workflow logging in practice.
from laboneq.workflow.logbook import LoggingStore
logging_store = LoggingStore()
logging_store.deactivate()
Running the Experiment Workflow¶
You'll now instantiate the experiment workflow and run it. For more details on what experiment workflows are and what tasks they execute, see the Experiment Workflows tutorial.
You'll start by importing the IQ-blobs experiment workflow from laboneq_applications, as well as plot_simulation for inspecting the experiment sequence.
from laboneq.contrib.example_helpers.plotting.plot_helpers import plot_simulation
from laboneq_applications.experiments import iq_blobs
Let's first create the options class for the IQ-blobs experiment and inspect it using the show_fields function from the workflow namespace of LabOne Q, which was imported from laboneq.simple:
options = iq_blobs.experiment_workflow.options()
workflow.show_fields(options)
Notice that, unless we change it:
- the experiment is run in
AcquisitionType.INTEGRATIONandAveragingMode.SINGLE_SHOT, using 1024 averages (count) - the analysis workflow will run automatically (
do_analysis=True) - the figures produced by the analysis are automatically closed (
close_figures=True)
Here, let's disable closing the figures produced by the analysis so we see them in the cell output. Note however that the fit attempted by the analysis routine in emulation mode will not be representative, because we do not acquire data from a real experiment.
options.close_figures(False)
Now we run the experiment workflow on the first two qubits in parallel, for the states $|g\rangle$, $|e\rangle$, and $|f\rangle$.
# our qubits live here in the demo setup:
qubits = qpu.qubits
exp_workflow = iq_blobs.experiment_workflow(
session=session,
qpu=qpu,
qubits=[qubits[0],qubits[1]],
states="gef",
options=options
)
workflow_results = exp_workflow.run()
Inspect the Tasks That Were Run¶
for t in workflow_results.tasks:
print(t)
Inspect the Output Simulation¶
You can also inspect the compiled experiment and plot the simulated output:
compiled_experiment = workflow_results.tasks["compile_experiment"].output
plot_simulation(compiled_experiment, length=10e-6)
Inspecting the Source Code of the Pulse-Sequence Creation Task¶
You can inspect the source code of the create_experiment task defined in iq_blobs to see how the experiment pulse sequence is created using quantum operations. To learn more about the latter, see the Quantum Operations tutorial.
iq_blobs.create_experiment.src
To learn more about how to work with experiment Workflows, check out the Experiment Workflows tutorial.
Here, let's briefly inspect the analysis-workflow results.
Analysis Results¶
Let's check what tasks were run as part of the analysis workflow:
analysis_workflow_results = workflow_results.tasks["analysis_workflow"]
for t in analysis_workflow_results.tasks:
print(t)
We can access the readout f extracted by the analysis from the output of the analysis-workflow:
from pprint import pprint
pprint(analysis_workflow_results.output) # noqa: T203
Check out the Experiment Workflows tutorialto see how you can manually update the qubit parameters to these new values, or reset them to the old ones.
Great! You've now run your IQ-Blobs experiment. Check out other experiments in this manual to keep characterizing your qubits.