The Numeric tab provides a powerful time domain based measurement display as introduced in Unique Set of Analysis Tools. It is available on all UHFLI instruments. On UHFAWG instruments, the tab is available if at least one of the options UHF-BOX or UHF-LIA is installed.
- Display of demodulator output data and other streamed data, e.g. auxiliary inputs, PID errors, Boxcar data, demodulator frequencies, AU data, etc.
- Graphical and numerical range indicators
- Polar and Cartesian formats
- Support for Input Scaling and Input Units
The Numeric tab serves as the main numeric overview display of multiple measurement data. The display can be configured by both choosing the values displayed and also rearrange the display tiles by drag-and-drop. Whenever the tab is closed or an additional one of the same type is needed, clicking the following icon will open a new instance of the tab.
|Access to all continuously streamed measurement data as numerical values.
The numeric tab (see Figure 1) is divided into a display section on the left and a configuration section on the right. The configuration section is further divided into a number of sub-tabs.
The numeric tab can be deployed to display the demodulated signal, phase, frequency as well as the signal levels at the auxiliary inputs. By default, the user can display the demodulated data either in polar coordinates (R, Θ) or in Cartesian coordinates (X, Y) which can be toggled using the presets. To display other measurement quantities as available from any of the presets simply click on the tree tab next to the preset tab. The desired display fields can be selected under each demodulator’s directory tree structure.
|Select a Preset
|Select numerical view based on a preset. Alternatively, the displayed value may also selected based on tree elements.
|Shows R and Phase of all demodulators.
|Enabled Demods Polar
|Shows R and Phase of enabled demodulators.
|Shows X and Y of all demodulators.
|Enabled Demods Cartesian
|Shows X and Y of enabled demodulators.
|Shows R of all demodulators.
|Shows amplitude of all boxcars.
|Shows error of all PID.
|Shows output of all Cartesian and polar arithmetic units.
|Shows no signals.
|If additional signals are added or removed the active preset gets manual.
For the Tree sub-tab please see the section called "Tree Selector".