Skip to content

Change Log

Release 24.04

Release date: 30-Apr-2024

Release 24.01

Release date: 31-Jan-2024

  • Sweeper: The sweeper grid now includes the exact start and stop sweeping points.
  • Threshold Unit (TU): Indicators to display the saturation of TU input at lower and upper bounds.
  • AM/FM MOD Option: Phase-adjust capability to nullify the measured phase of demodulated signals.

Release 23.10

Release date: 31-Oct-2023

  • Sweeper: Setting the start and stop points of the sweep parameter from the x-axis cursors in the Sweeper tab.
  • Scope: Recording of scope streaming samples in HDF5 format from the Config tab.

Release 23.06

Release date: 30-Jun-2023

  • Impedance Analyzer: Equivalent circuit model for dielectric material characterization.
  • Impedance Analyzer: Open-circuit mode for user compensation.
  • Impedance Analyzer: Impedance phase compensation for any cable length.

Release 23.02

Release date: 28-Feb-2023

  • Aux Outputs: Changed the default scale factor from 1 to 10.
  • LabOne API: Added support of Python 3.11.
  • Sweeper Module: Improved phase unwrap feature.
  • LabOne: Dropped support for Windows 7 and Windows 8.1 as they have reached their end of life.

Release 22.08

Release date: 31-Aug-2022

  • Lock-in Amplifier: Added Tip Protect feature to adjust the Aux Output signal.
  • Scope Module: Added Aux Output trace to Scope input to display Aux Output value after Limit and Tip Protect units.
  • PID/PLL Option: Added Threshold Unit output to the list of signal inputs for PID controllers.
  • Impedance Analyzer: Added input monitor and signal-add control of signal output to IA tab.

Release 22.02

Release date: 28-Feb-2022

  • LabOne Software: 'Flat Top' window function for FFT mode of Scope, DAQ, and Spectrum.
  • Impedance Analyzer: Option to enable or disable all confidence indicators at once.
  • LabOne API: Support of Python 3.10.

Release 21.08

Release date: 31-Aug-2021

  • User Manual: HTML version available in LabOne user interface and online documentation.
  • LabOne Software: Support for GNU/Linux and macOS on ARM64 and Apple M1 processors.
  • Impedance Analyzer: Current Zone ranging feature to set the switching frequency limits for current input ranges.

Release 21.02

Release date: 28-Feb-2021

  • LabOne API: Added online Programming Manual and Documentation.
  • Sweeper: Simultaneous display of standard and X-Y plots to visualize Nyquist and Bode plots at the same time.
  • Sweeper: Improved rendering of sweeps with more than 2000 points.

Release 20.07

Release date: 20-Aug-2020

  • LabOne: Trends plots to track readings from the Math sub-tab over time.
  • LabOne: Device Information report in Device tab.
  • LabOne: Improved colormaps available for 2D plots.
  • PID Advisor: clamp maximum advised bandwidth to hardware limits to guard against instability.

Release 20.01

Release date: 28-Feb-2020

  • MD option: external reference mode is available for all demodulator paths.
  • MOD option: enabled simultaneous demodulation of both sidebands when carrier and sideband frequencies are provided by external references.
  • PID option: added control button to keep or reset the integrator value on stop and restart of PID controllers.
  • LabOne: added linear fit to the Math sub-tab of Sweeper and DAQ tabs.
  • LabOne: histogram data can be saved in CSV format.
  • LabOne: added option to display a normal or Rice distribution fit of histogram in Plotter tab.
  • LabOne: improved importing of saved SVG figures to main vector graphics editors.