Inputs/Outputs Tab

The In / Out tab provides access to the settings of the Instrument’s main Signal Inputs and Signal Outputs. It is available on all HF2 Series instruments.

Features

  • Signal input configuration

  • Signal output configuration

Description

The In / Out tab gives access to the same settings as do the left-most and the right-most sections of the Lock-in tab. It is mainly intended to be used on small screens that can not show the entire the Lock-in tab at once. Whenever the tab is closed or an additional one of the same type is needed, clicking the following icon will open a new instance of the tab.

Table 1. App icon and short description
Control/Tool Option/Range Description

In/Out

btn mnu inout um

Gives access to all controls relevant for the Signal Inputs and Signal Outputs on the instrument’s front.

The In / Out tab contains one section for the signal inputs and one for the signal outputs. All of the corresponding connectors are placed on the instrument front panel. The In / Out tab looks differently depending on whether the HF2-MF Multi-frequency option is installed or not.

functional inout
Figure 1. LabOne UI: Inputs/Outputs tab (base configuration)
functional inoutmf
Figure 2. LabOne UI: Inputs/Outputs tab (with HF2-MF Multi-frequency option)

Functional Elements

All functional elements are equivalent to the ones on the Lock-in tab. See the Lock-in Tab or Lock-in MF Tab for a detailed description of the functional elements.