Inspect the Package Contents

If the shipping container appears to be damaged, keep the container until you have inspected the contents of the shipment and have performed basic functional tests.

Please verify:

  • You have received 1 Zurich Instruments MFIA Instrument

  • You have received 1 Zurich Instruments MFITF Impedance Test Fixture

  • You have received 1 power cord with a power plug suited to your country

  • You have received 1 USB cable and/or 1 LAN cable (category 5/6 required)

  • You have received 1 WiFi USB adapter

  • You have received 1 Getting Started booklet

  • The "Next Calibration" sticker on the rear panel of the Instrument indicates approximately 2 years ahead in time. Zurich Instruments recommends calibration intervals of 2 years

  • The MAC address and serial number of the instrument are displayed on a sticker on the back panel

Table 1. Package contents for the MFIA Instrument
mfia front panel
mfitf box

MFITF Impedance Test Fixture including DUT carriers

powercord de

Power cord (example: EU norm)

usbcable

USB cable

mfli powerinlet

Power inlet with power switch and fuse holder

mfli lancable

LAN / Ethernet cable (category 5/6 required)

mf wifi adapter

WiFi USB adapter

mfli device label

S/N and MAC address sticker on the back panel of the instrument

calibration label

"Next Calibration" sticker on the back panel of the instrument

The MFIA Instrument is equipped with a multi-mains switched power supply, and therefore can be connected to most power systems in the world. The fuse holder is integrated with the power inlet, and can be extracted by grabbing the holder with two small screwdrivers at the top and at the bottom at the same time. A spare fuse is contained in the fuse holder. The fuse description is mentioned in the specifications chapter.

Carefully inspect your Instrument. If there is mechanical damage or the instrument does not pass the basic tests, then you should immediately notify the Zurich Instruments support team at [email protected].