Change Log¶

Info

A complete summary of all changes can be found in the LabOne Release Notes. This page only lists changes not present in the LabOne Release Notes.

Release 25.04¶

Release date: 30-April-2025

See Release Notes 25.04 for a detailed list of all changes.

Release date: 31-January-2025

See Release Notes 25.01 for a detailed list of all changes.

Release date: 31-Oct-2024

PID indicator data (value, shift and error) are enabled and displayed in the PID/PLL tab of LabOne UI.
PID indicator data (value, shift and error) can be streamed to the host computer. This can be controlled in the PID/PLL tab of LabOne UI.
PID indicator data (value, shift and error) are available on Aux Outputs and can be selected in Aux tab of LabOne UI.
Enabled the PID Advisor tool to simulate the behavior of a number of different DUT types in a feedback loop and choose feedback gain parameters based on the simulation.
Enabled subscription to PID signals (value, shift and error) in the LabOne Sweeper module and Sweeper tab of LabOne UI.
Consistent spectral measurement across Sweeper, Scope, Data Acquisition, and Spectrum tools.

Release date: 31-Jul-2024

Connected the Auxiliary Input channels to the Scope module to capture the digitized signals.
Connected the Auxiliary Input channels to the Demodulators and enabled them for external reference.
Added input range control for Auxiliary Inputs.
Added input range utilization reporting for Signal Inputs and Auxiliary Inputs.
Added user-configurable delay compensation for demodulated signals from Signals Inputs and Auxiliary Inputs.
Oscilloscope: The Scope module of LabOne offers now Uniform averaging in addition to already available Exponential averaging.

Release date: 30-Apr-2024

GHF-MOD Modulation Analysis option that introduces two modulation units for sideband analysis is enabled.

Release date: 31-Jan-2024

DAQ module can acquire and analyze hardware-triggered demodulator data.
Demodulator metadata provides information on frequencies and sources.
Demodulator frequencies are included in the LabOne UI analysis tools.
Bypassing the demodulator LPF is available in the LabOne UI.
Demodulator input selectors are independent from the multi-frequency (MF) option.

Release date: 31-Oct-2023

GHF-PID Quad PID/PLL Controller Option is enabled.
External reference (ExtRef) feature allowing the user to lock an oscillator to an external signal's frequency.
Amplitude (R) and Phase (Theta) of the demodulated signals are now available at the Auxiliary Outputs.
Demodulator data acquisition can be triggered via Trigger Inputs.
Connectivity: Ethernet-over-USB on the USB 2 interface.
Sweeper: Setting the start and stop points of the sweep parameter from the x-axis cursors in the Sweeper tab.

Release date: 30-Jun-2023