Ctrl+K

zhinst-qcodes

Site Navigation

  • First Steps
  • Package Documentation
  • Changelog
  • About
  • License

Site Navigation

  • First Steps
  • Package Documentation
  • Changelog
  • About
  • License

Section Navigation

  • utils
    • shf_sweeper
      • AvgConfig
        • __init__
        • integration_delay
        • integration_time
        • mode
        • num_averages
      • Config
        • __init__
        • count
        • index
        • avg
        • rf
        • sweep
        • trig
      • EnvelopeConfig
        • __init__
        • delay
        • waveform
      • RfConfig
        • __init__
        • center_freq
        • channel
        • input_range
        • output_range
      • ShfSweeper
        • __init__
        • configure
        • get_configuration
        • get_offset_freq_vector
        • get_result
        • plot
        • run
        • set_to_device
      • SweepConfig
        • __init__
        • mapping
        • num_points
        • oscillator_gain
        • settling_time
        • start_freq
        • stop_freq
        • use_sequencer
      • TriggerConfig
        • __init__
        • force_sw_trigger
        • imp50
        • level
        • source
    • shfqa
      • multistate
        • compare_threshold
        • config_to_device
        • get_qudits_results
        • get_settings_transaction
        • weighted_integration
        • IntegrationWeight
        • QuditSettings
        • QuditState
      • shfqa
        • configure_channel
        • configure_result_logger_for_readout
        • configure_result_logger_for_spectroscopy
        • configure_scope
        • configure_sequencer_triggering
        • configure_weighted_integration
        • enable_result_logger
        • enable_scope
        • enable_sequencer
        • get_result_logger_data
        • get_scope_data
        • load_sequencer_program
        • max_qubits_per_channel
        • start_continuous_sw_trigger
        • write_to_waveform_memory
    • shfqc
      • shfqc
        • configure_marker_and_trigger
        • configure_pulse_modulation
        • configure_qa_channel
        • configure_qa_sequencer_triggering
        • configure_result_logger_for_readout
        • configure_result_logger_for_spectroscopy
        • configure_scope
        • configure_sg_channel
        • configure_sine_generation
        • configure_weighted_integration
        • enable_result_logger
        • enable_scope
        • enable_sequencer
        • get_result_logger_data
        • get_scope_data
        • load_sequencer_program
        • max_qubits_per_qa_channel
        • start_continuous_sw_trigger
        • upload_commandtable
        • write_to_waveform_memory
    • shfsg
      • configure_channel
      • configure_marker_and_trigger
      • configure_pulse_modulation
      • configure_sine_generation
      • enable_sequencer
      • load_sequencer_program
      • upload_commandtable
      • write_to_waveform_memory
    • utils
      • api_server_version_check
      • assert_node_changes_to_expected_value
      • autoConnect
      • autoDetect
      • bw2tc
      • bwtc_scaling_factor
      • check_for_sampleloss
      • convert_awg_waveform
      • create_api_session
      • default_output_mixer_channel
      • devices
      • disable_everything
      • get_default_settings_path
      • load_labone_csv
      • load_labone_demod_csv
      • load_labone_mat
      • load_settings
      • load_zicontrol_csv
      • load_zicontrol_zibin
      • parse_awg_waveform
      • save_settings
      • sigin_autorange
      • systemtime_to_datetime
      • tc2bw
      • volt_rms_to_dbm
      • wait_for_state_change
    • versioning
      • minimum_version

__init__#

IntegrationWeight.__init__(state_left: QuditState, state_right: QuditState)[source]#
Parameters:
  • state_left (QuditState) –

  • state_right (QuditState) –

previous

IntegrationWeight

next

center_threshold

Show Source

© Copyright 2022, Zurich Instruments AG.

Created using Sphinx 5.1.1.