shfqa

Zurich Instruments LabOne Python API Utility functions for SHFQA.

Functions

configure_channel(daq, device_id, ...)	Configures the RF input and output of a specified channel.
configure_result_logger_for_readout(daq, ...)	Configures a specified result logger for readout mode.
configure_result_logger_for_spectroscopy(...)	Configures a specified result logger for spectroscopy mode.
configure_scope(daq, device_id, *, ...[, ...])	Configures the scope for a measurement.
configure_sequencer_triggering(daq, ...[, ...])	Configures the triggering of a specified sequencer.
configure_weighted_integration(daq, ...[, ...])	Configures the weighted integration on a specified channel.
enable_result_logger(daq, device_id, ...[, ...])	Resets and enables a specified result logger.
enable_scope(daq, device_id, *, single[, ...])	Resets and enables the scope.
enable_sequencer(daq, device_id, ...)	Starts the sequencer of a specific channel.
get_result_logger_data(daq, device_id, ...)	Return the measured data of a specified result logger.
get_scope_data(daq, device_id, *[, timeout])	Queries the scope for data once it is finished.
load_sequencer_program(daq, device_id, ...)	Compiles and loads a program to a specified sequencer.
max_qubits_per_channel(daq, device_id)	Returns the maximum number of supported qubits per channel.
start_continuous_sw_trigger(daq, device_id, ...)	Issues a specified number of software triggers.
write_to_waveform_memory(daq, device_id, ...)	Writes pulses to the waveform memory of a specified generator.