Skip to content

Specifications

Important

Unless otherwise stated, all specifications apply after 30 minutes of instrument warm-up.

Important

Important changes in the specification parameters are explicitly mentioned in the revision history of this document.

QCCS system specifications

Parameter min typ max
Supported peripheral devices SHFQC, HDAWG, SHFSG, SHFQA    
Supported system architecture Star architecture    
Output channel skew - - 1.6 ns
Output channel skew repeatability over restarts - - 200 ps
Real-time communication latency - - 90 ns
Sample rate - 2.0 GSa/s -

Synchronization and real-time data exchange interface

Parameter Value
Interface type ZSync proprietary
Number of ports 56
Cable length 3m

Analog Interface Specifications

Table 1: Triggers
Parameter Details min typ max
Inputs - 4    
Input voltage range 50 Ω impedance 0 V - 3.3 V
Input threshold - - 1.0 V -
Outputs - 4    
Output voltage range 50 Ω impedance 0 V - 3.3 V
Impedance - 50 Ω    
Coupling - DC    
Connectors type - SMA    
Table 2: Clocks
Parameter Details min typ max
Interfaces - Input, Output and Sysref output    
Input frequency - 10 MHz    
Input amplitude 50 Ω impedance -10 dBm (200 mVpp) - +13 dBm (2.5 Vpp)
Input coupling - AC    
Output frequency - 100 MHz    
Output amplitude 50 Ω impedance +4 dBm (1.0 Vpp)    
Output coupling - DC    
Impedance - 50 Ω    
Connectors type - SMA    

General Specifications

Table 3: General and storage
Parameter min typ max
storage temperature –25 °C - 65 °C
storage relative humidity (non-condensing) - - 95%
operating temperature 5 °C - 40 °C
operating relative humidity (non-condensing) - - 90%
specification temperature 18 °C - 28 °C
power consumption - - 120 W
operating environment IEC61010, indoor location, installation category II, pollution degree 2    
operating altitude up to 2000 meters    
power supply AC line 100-240 V (±10%), 50/60 Hz    
dimensions with handles and feet 45.0 × 46.0 × 14.5 cm, 17.6 × 18.1 × 5.7 inch, 19 inch rack compatible    
weight 8.0 kg    
recommended calibration interval 2 years    
Table 4: Host computer requirements
Parameter Description
supported Windows operating systems Windows 10, 11 on x86-64
supported macOS operating systems macOS 10.11+ on x86-64 and ARMv8
supported Linux distributions GNU/Linux (Ubuntu 14.04+, CentOS 7+, Debian 8+) on x86-64 and ARMv8
supported processors x86-64 (Intel, AMD), ARMv8 (e.g., Raspberry Pi 4 and newer, Apple M-series)
Table 5: Digital Interface Specifications
Parameter Description
host computer connection 1GbE, LAN / Ethernet
  USB 3.0
Debug interface JTAG (over USB)