configure_pulse_modulation#
- configure_pulse_modulation(daq, device_id, channel_index, *, enable, osc_index=0, osc_frequency=100000000.0, phase=0.0, global_amp=0.5, gains=(1.0, - 1.0, 1.0, 1.0), sine_generator_index=0)[source]#
Configure the pulse modulation.
Configures the sine generator to digitally modulate the AWG output, for generating single sideband AWG signals.
- Parameters
daq (
ziDAQServer) – Instance of a Zurich Instruments API session connected to a Data Server. The device with identifier device_id is assumed to already be connected to this instance.device_id (
str) – SHFSG device identifier, e.g. dev12004 or ‘shf-dev12004’channel_index (
int) – Index of the used SG channel.enable (
int) – Enables modulation.osc_index (
int) – Selects which oscillator to use.osc_frequency (
float) – Oscillator frequency used to modulate the AWG outputs. (default = 100e6)phase (
float) – Sets the oscillator phase. (default = 0.0)global_amp (
float) – Global scale factor for the AWG outputs. (default = 0.5)gains (
tuple) – Sets the four amplitudes used for single sideband generation. default values correspond to upper sideband with a positive oscillator frequency. (default = (1.0, -1.0, 1.0, 1.0))sine_generator_index (
int) – Selects which sine generator to use on a given channel.
- Return type
None